Our Hyperbaris Hot Tubs offer a unique blend of wooden exterior and durable acrylic interior. The hot tub comes with a two-year warranty and features an external steel heater for fast heating in 2-3 hours. The acrylic form is cast from a mass three times thicker than fiberglass, providing excellent resistance to chemicals, scratches and weather damage. This hot tub model has an inside diameter of 185 cm and an outside diameter of 200 cm and weighs 200 kg. The acrylic interior is available in 7 different colors and the exterior color can be chosen freely. With a capacity of 1400 liters, this hot tub can accommodate 4-6 people and is customizable with options such as a massage system and LED lights. Delivery time is 4-6 weeks. Choose this hot tub for its quality and versatility.
The main advantage of an external heater is the provision of extra space in the tub. We may compare it to the 180 cm wide hot tub with an internal heater. Such a hot tub has approximately 6-8 seats.
Modern control
You may control the outdoor or underwater LED lighting by a comfortable, hermetic control unit corresponding to IP64 ingress protection. The buttons on the control unit can be replaced separately. It makes the maintenance and service much easier.
Air massage system
The structure of the air massage system: 700W air compressor, 12 jets installed in the wall of the hot tub, and other installation materials. The air massage system may be switched on and off by pressing a button on the hot tub’s panel. After draining the water out of the hot tub, it is necessary to switch on the massage system for 30 seconds in order to drain water from the system.
IMPORTANT! During the cold seasons, the massage system can be switched on only after heating the filled-in water up to +30oC degrees temperature.
Hydro massage system
Structure of the COMBINED MASSAGE SYSTEM: 700W air compressor, 900-1100 W water compressor, 8 combined water/air jets installed in the wall of the hot tub, and 4 extra air nozzles.
The combined message system is equipped with 2 switches, located on the panel of the hot tub. One of them turns on and off the air compressor; meanwhile, the other turns on and off the water compressor. It is possible to turn on either air massage function or water massage function, or both devices at the same time. By rotating every nozzle, it is possible to adjust the amount of water coming out through the jet.
WHY CHOOSE AN ACRYLIC HOT TUB?
Acrylic has been used for making SPA baths, and household bathtubs for more than 50 years. It is a durable, human- and environmentally-friendly material.
What hot tubs can be found on the market and how do they differ from one another:
Wooden hot tubs – 5 years ago manufacturers used to make hot tubs from wood. This type of hot tub is hard to maintain and does not meet hygiene requirements. A fiberglass and paint (Gelcoat) hot tub is one of the most popular and most common types of hot tubs. These hot tub shells are made from fiberglass, resin, and paint. Such hot tubs are durable if they are made according to all applicable requirements. A lot of effort, equipment, and know-how are necessary in order to make them correctly. Unfortunately, this type of hot tub is very rare. On the inside of the hot tub, the thing that the clients see and touch is paint. The paint coating is different depending on the manufacturer. Paint is not a durable material and is not resistant to environmental effects. Paint mostly fades after first use and the water line occurs. Such hot tub shells are not UV-resistant. Over time paint becomes porous and the hot tub becomes hard to maintain and clean because dirt and limescale adhere strongly to the surface. The main problem of such hot tubs is osmosis when small air bubbles from under the coat of paint after some time of use and in time such bubbles burst. The hot tub loses its functionality and appearance. It is possible to repair the cracks, but it requires a lot of skill and time. Furthermore, these hot tubs have an unpleasant smell due to a high amount of chemicals, which evaporate over time. Such hot tubs may cause allergic reactions.
Acrylic hot tubs are made from a human- and environmentally-friendly sheet material. The making of an acrylic hot tub shell is very different from fibreglass shells. An acrylic sheet is heated in a furnace and after it reaches a certain temperature it is pressed into a mould using a vacuum. This ensures the highest quality of the hot tub shell and colour is maintained throughout the thickness of the material. In order to ensure stability and rigidity of the hot tub shell, it is reinforced with special materials during the production process, the shell consists of 4 layers.
Acrylic hot tubs are durable, UV-resistant, human and environmentally friendly, antibacterial, and resistant to salts and chlorine. Acrylic hot tubs are easy to maintain, pleasant to touch, sleek and ergonomic. Various colours are possible.
Omtaler
Det er ingen omtaler ennå.
Bli den første til å omtale “Hyperbaris Classic OUT ACRYLIC” Avbryt svar
Omtaler
Det er ingen omtaler ennå.